** The FIBRA products can only be installed after receiving authorised certification directly from AJAX. Contact security@mstronics.com for more information on how to obtain the certification license**
Thoughtful design with safety in mind
Record Fibra line length
Flexible security system design
Discover future-proof hardware
Multi-purpose casing
Unique wired technology
Energy efficiency first
Sabotage resistance
Communication
Fibra communication technology : Proprietary wired communication technology combines the reliability of wires with the freedom of radio connection
Key features : Two-way communication / Advanced anti-sabotage / Block encryption featuring a dynamic key / Instant notifications / Remote configuration in the Ajax apps
Line connection : 4-core cable
Connection : to any point of the Fibra line / LineSupply (45 W) can be installed after a hub, detector, keypad, siren, or another LineSupply. The module provides additional power to Fibra devices installed between the LineSupply (45 W) and the end of the line
Wired connection range : between the module and the hub — up to 2,000 m / between the module and the last Fibra device on the line — up to 2,000 m / The maximum line length is relevant when using the U/UTP cat.5 twisted pair
Encrypted communication : All stored and transmitted data are protected by block encryption featuring a dynamic key
Line connection
Number of input lines : 1 / LineSupply (45 W) can be connected after any Fibra device
Number of output lines : 1 / Fibra devices with a total power consumption of up to 30 W can be connected to the output line
Cable length : up to 2,000 m / For the output line between the module and the last Fibra device on the line when using U/UTP cat.5 twisted pair
Galvanic isolation : Ensures that devices connected between the LineSupply (45 W) and the end of the line do not consume power from the hub
Power supply
Main : 100–240 V~, 50/60 Hz
Backup : 12 V⎓ battery with a capacity from 7 to 18 Ah / Not included. When the main power is available, the backup battery is charged from the mains
Power output : of the output line — 30 W / to charge the backup battery — 15 W
Recommendations
Power supply 100–240 V~ / The device is designed for indoor use only. Installation in Case C (260) or Case D (430) is recommended. The casing is sold separately
Sabotage protection
Tamper alarm : LineSupply (45 W) has a connector to fasten the tamper board to the module. The tamper board is in Case that is sold separately
Protection against short circuit on the line
Protection against overvoltage : on the Fibra signal lines / The module protects devices when voltage is applied to the signal terminals A, B
Protection against spoofing : device authentication
Communication loss detection : after 36 s / Between the hub and LineSupply (45 W). It can be changed in hub settings
Enclosure
Dimensions : 160 × 85 × 53 mm
Weight : 456 g
Operating temperature range : from –10 °C to +40 °C
