Customizable videowall for simultaneous monitoring
Smooth archive search
Instant event-to-video alarm verification
Built-in motion detection
Hassle-free installation and setup
Recommendations
The device's operating voltage is 9–16 V⎓. : NVR DC is designed for indoor installation only.
Compatibility
Hub
Hub Plus
Hub 2 (2G)
Hub 2 (4G)
Hub 2 Plus
Hub Hybrid (2G)
Hub Hybrid (4G)
Videostream
8-channel : With up to 4K resolution (25/30 FPS).
IP cameras : ONVIF (Profile S/T) / RTSP
Storage : hard drive with a capacity of up to 16 TB (SATA connectivity, 3.5” size) / HDD not included
Decoding formats : H.265 / H.264
Bandwidth : up to 100 Mbps
Communication channels
Ethernet : up to 100 Mbps
Bluetooth : BLE frequency band: 2.400–2.4835 GHz / To set up an Ethernet connection.
Radio signal power : 2.5 mW (100 mW limit)
Key features
Motion detection : NVR has built-in software to detect the motion in the frame. Possible to switch between image analysis by NVR or camera algorithms
In-app video management system : Videowall that combines images from all connected cameras / Event filters / Timeline with smooth preview
Visual verification of Ajax alarms : NVR allows setting up a scenario in which Ajax detectors trigger specific cameras to start recording. This results straight in mobile and desktop (monitoring) apps
Privacy : Access rights distribution for users in mobile apps and for monitoring operators in PRO Desktop
Power supply
Without an installed jumper on the PSU board : 8–16 V⎓, up to 4 A
8 V⎓ — turn-on threshold when the voltage rises / 6.5 V⎓ — turn-off threshold when the voltage drops
With an installed jumper on the PSU board : 12.1–16 V⎓, up to 4 A / 12.1 V⎓ — turn-on threshold when the voltage rises / 10.35 V⎓ — turn-off threshold when the voltage drops
Power consumption : up to 24 W
Clock battery : CR2032 battery, 3 V / Only to power the system clock.
Sabotage protection
Tamper alarm : Notifications about attempts to detach the device from the surface or remove it from the mounting panel